SKU: 82355120748

XS Power S975 12V AGM Racing Battery

$108.00 $120.00
Save 10%
No.2 Bestseller on www.wajanjatech.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

XS Power S975 12V AGM Racing Battery12 Volt AGM Racing Battery Group U1R Max Amps (Burst): 2,100 Cranking Amps: 604 Cold Cranking Amps: 532 Reserve Capacity: 72 minutes 580 & M6 Terminal Hardware Incl. Three Year Warranty Charging Temp: 5F to 120F ( 15C to 50C) 28. 5 lbs. The XS Power S975 AGM Battery is equally at home on a track or in a daily driver. Weighing just under 30 pounds, the S975 delivers a burst of power up to 2,100 amps and 1,012 cold cranking amps for fast, reliable

  • 12-Volt AGM Racing Battery
  • Group U1R
  • Max Amps (Burst): 2,100
  • Cranking Amps: 604
  • Cold Cranking Amps: 532
  • Reserve Capacity: 72 minutes
  • 580 & M6 Terminal Hardware Incl.
  • Three Year Warranty
  • Charging Temp: 5F to 120F (-15C to 50C)
  • 28.5 lbs.

The XS Power S975 AGM Battery is equally at home on a track or in a daily driver. Weighing just under 30 pounds, the S975 delivers a burst of power up to 2,100 amps and 1,012 cold-cranking amps for fast, reliable starts in any weather. The sealed construction offers a spillproof, vibration-resistant design - perfect for the stress of racing and life on the road.

With plenty of juice in reserve, it can run the vehicle plus up to 1,000 watts of aftermarket gear like the ECU, fuel pump, and gauges. Using the S975 as a powerful secondary battery gives you an additional 2,000 watts of capacity just waiting to be tapped.

Using Absorbent Glass Mat (AGM) technology, the S975 easily delivers all the energy you need to effortlessly start the motor and power your entire electrical grid. Its sealed construction keeps it completely safe from vibration, spills and moisture.

See the details below.

DESCRIPTION

12V BCI Group U1R, AGM Battery, 1,000W/2,000W Range

Weight Lbs. – 28.50
Weight Kgs. – 12.95
Length – 7.83 in
Height – 6.68 in
Width – 5.3 in
Max Amps – 2,100A
CA – 604
CCA – 532
Ah – 43
RC – 72
580 and M6 Terminal Hardware Included
3 Year Warranty 

DOWNLOAD INSTRUCTIONS  


PROP 65 WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer or birth defects or other reproductive harm. Wash hands after handling.

For more information, visit www.P65Warnings.ca.gov


Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 82355120748

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 740 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
mike
Cuba, US
★★★★★ 5
Helpful Tool Kit for MerCruiser Maintenance
This tool kit made servicing the gimbal bearing and checking engine alignment much easier than improvising with generic tools. The machining looks solid and the tools fit properly with MerCruiser components. Helpful set for anyone doing their own marine maintenance work. Definitely useful to have around for sterndrive service jobs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
J
Jo Bo
Port Orchard, US
★★★★★ 5
Saves So Much Time, Perfect Fit On Mercruiser Pre-Alpha Outdrive.
This is a very useful kit. Perfect fit to exchange and align the gimbal bearing on a Mercruiser MR/Pre-Alpha Outdrive. The metal rods are strong and well machined to fit the gimbal bearing and the template lines up great with the housing studs. The overall production quality is very good. Great value because the tools are very durable but for me the biggest value is the time saved. I had the bearing out in about 10 minutes. The ability to line up the bearing before attempting to attach the outdrive upper gear unit is very convenient and saves so much time. This are simple tools, very easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
R
Rick
New York, US
★★★★★ 5
Easy to use
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
S
Verified Purchase
Steve M.
San Leandro, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Boise, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025

recommand products

Fel-Pro 09-14 Acura TL/08-17 Honda Accord/05-20 Pilot Engine Conversion Gasket Set
97.95
Fel-Pro 04-08 Acura TSX/03-07 Honda Accord/07-09 CR-V Engine Intake Manifold Gasket Set
44.60
Boot with Hat (Please put multiple colors in special instructions)
25.00
James Caan Signed 11x17 Godfather Poster JSA COA from Private Signing #9024
140.00
Fel-Pro 09-13 Chevrolet Silverado 1500/08-13 Corvette/14-15 Camaro Engine Crankshaft Seal Kit
56.33