SKU: 81190262620

Janis Joplin Tumbler Glass

$18.90 $21.00
Save 10%
No.2 Bestseller on www.wajanjatech.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Janis Joplin Tumbler GlassAn iconic tumbler made from recycled glass bottle! Featuring an image of the one and only Janis Joplin. Each glass purchased generates employment, reuses bottles that would otherwise go to landfill, and contributes to good causes. Bottles are collected from the streets and sold to a recycling centre. The recycling centre sorts and washes the bottles. Each bottle is cut by hand. The edges are polished and melted to create a smooth safe finish. The

An iconic tumbler made from recycled glass bottle! Featuring an image of the one and only Janis Joplin.

Each glass purchased generates employment, reuses bottles that would otherwise go to landfill, and contributes to good causes. Bottles are collected from the streets and sold to a recycling centre. The recycling centre sorts and washes the bottles. Each bottle is cut by hand. The edges are polished and melted to create a smooth safe finish. The glass has the design applied then heat is applied to seal the paint. The colour of the glass may vary slightly depending on the tone of the bottle.

Capacity: 500 ml. Dimensions: 15 x 7.3 cm. Weight: 302 grams. Compostable plastic-free packaging.

Hand wash only, do not put in a dishwasher (the chemicals in some detergents can remove the paint). Made in Chile.


 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 81190262620

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 2056 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
mike
Lowell, US
★★★★★ 5
Helpful Tool Kit for MerCruiser Maintenance
This tool kit made servicing the gimbal bearing and checking engine alignment much easier than improvising with generic tools. The machining looks solid and the tools fit properly with MerCruiser components. Helpful set for anyone doing their own marine maintenance work. Definitely useful to have around for sterndrive service jobs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
J
Jo Bo
Charlottesville, US
★★★★★ 5
Saves So Much Time, Perfect Fit On Mercruiser Pre-Alpha Outdrive.
This is a very useful kit. Perfect fit to exchange and align the gimbal bearing on a Mercruiser MR/Pre-Alpha Outdrive. The metal rods are strong and well machined to fit the gimbal bearing and the template lines up great with the housing studs. The overall production quality is very good. Great value because the tools are very durable but for me the biggest value is the time saved. I had the bearing out in about 10 minutes. The ability to line up the bearing before attempting to attach the outdrive upper gear unit is very convenient and saves so much time. This are simple tools, very easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
R
Rick
Pawtucket, US
★★★★★ 5
Easy to use
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
S
Verified Purchase
Steve M.
Louisville, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Lexington, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025

recommand products

Fel-Pro 94-97 Mazda Miata/91-96 Ford Escort Engine Intake Manifold Gasket Set
37.76
Charlie Sheen Signed 12x18 Photo w/Taylor Character Name JSA COA from Private Signing
68.00
DCM Colour Chart
19.99
Soft Pink Knit TOP
28.00
Blue/White Striped Blouse
28.00