Roof Fan Tray 120VAC 50/60HZ for NetShelter SX 750mm Wide x 1070mm Deep Enclosures

The Roof Fan Tray is a budget-friendly cooling companion for NetShelter SX enclosures, engineered to remove heat efficiently from the top of the rack. Designed for 120VAC operation at 50/60Hz, this compact fan tray provides a straightforward, maintenance-friendly solution to thermal management in data centers, server rooms, and network closets. Specifically sized to fit NetShelter SX enclosures that are 750mm wide and 1070mm deep, it integrates seamlessly into the enclosure’s roof to expel hot air upward and away from sensitive equipment. By relocating heat to the roof of the rack, airflow around equipment is improved, hot spots are minimized, and overall system performance is enhanced without the need for expensive ducting or complex retrofits. This rack cooling accessory is ideal for administrators seeking an economical upgrade path that delivers tangible improvements in temperature management while preserving space within the cabinet. Easy to install, reliable in operation, and compatible with a wide range of NetShelter SX configurations, the Roof Fan Tray represents a practical approach to sustaining equipment uptime and prolonging hardware life by maintaining cooler, more stable operating conditions.

• Key benefit: A low-cost, high-impact solution that actively removes heat from NetShelter SX enclosures by venting hot air through the roof, helping prevent thermal throttling and equipment stress.
• Exact fit and compatibility: Specifically designed for NetShelter SX enclosures that are 750mm wide and 1070mm deep, ensuring a snug, secure install with optimal airflow paths.
• Top-mount installation: The fan tray installs quickly on the enclosure roof, minimizing interior obstruction and preserving space inside the cabinet for cables, servers, and peripherals.
• Electrical and frequency compatibility: Operates on standard 120VAC power at 50/60Hz, aligning with common data center electrical infrastructure and reducing the need for adapters or special power supplies.
• Maintenance-friendly and reliable: Built as a durable cooling accessory with straightforward maintenance, designed to run continuously in server environments with minimal upkeep and downtime.

Technical Details of Roof Fan Tray 120VAC 50/60HZ for NetShelter SX 750mm Wide x 1070mm Deep Enclosures

• Compatibility: NetShelter SX enclosures sized 750mm W x 1070mm D.
• Voltage: 120 VAC.
• Frequency: 50/60 Hz.
• Mounting: Top-mount installation on the enclosure roof to expel heat.
• Function: Aids in heat removal by venting warm air from the enclosure roof.
• Application: Suitable for data centers, server rooms, and network closets using NetShelter SX systems.

how to install Roof Fan Tray 120VAC 50/60HZ for NetShelter SX 750mm Wide x 1070mm Deep Enclosures

• Prepare the enclosure: Power down the NetShelter SX unit and follow any facility lockout/tagout procedures as required before starting installation.
• Access the roof: Remove or loosen the top cover as per the enclosure manual to access the roof mounting area where the fan tray will be installed.
• Position and align: Place the Roof Fan Tray onto the enclosure roof, aligning mounting holes with the corresponding points on the enclosure. Ensure there is clear airflow path from the fan to the roof vent and that cables will not obstruct operation.
• Secure mounting: Fasten the fan tray securely to the roof using the screws or fasteners provided with the accessory, ensuring a stable and vibration-free installation.
• Connect power and test: Connect the fan tray to a 120VAC power source and restore power. Verify that the unit spins smoothly and that warm air is actively being expelled through the roof vents. Monitor enclosure temperatures to confirm improved cooling performance and ensure there are no obstructions in airflow.

Frequently asked questions

• Q: What does the Roof Fan Tray do? A: It provides a simple, cost-effective method to remove heat from NetShelter SX enclosures by exhausting hot air through the roof, improving cooling efficiency and reducing hot spots inside the cabinet.
• Q: What enclosure sizes does it fit? A: It is designed to fit NetShelter SX enclosures that are 750mm wide and 1070mm deep, offering a precise fit for optimal airflow at the top of the rack.
• Q: What power does it require? A: The fan tray operates on standard 120VAC power at 50/60Hz, compatible with typical data center electrical infrastructure without the need for voltage converters or adapters.
• Q: Can this be used with wall-mounted enclosures? A: The primary design is for top-mount installation on NetShelter SX enclosures; some installations may allow base mounting on wall-mounted configurations if supported by the enclosure and local electrical and mechanical guidelines. Always follow the manufacturer’s installation instructions.
• Q: Is installation difficult? A: No; the Roof Fan Tray is designed for straightforward top-mount installation with minimal tools. Basic electrical connection is required, and the process typically takes a short amount of time for technicians familiar with server rack equipment.
• Q: Does it require ongoing maintenance? A: The unit is built for reliability in data-center environments and typically requires minimal maintenance. Periodic visual inspections and cleaning of vents are usually sufficient to maintain optimal airflow.