Injector Dynamics ID 1750-XDS Injectors (8)

Injector Dynamics ID 1750-XDS Injectors (8)Set of 8 injectors The Best Just Got Better! The ID1750 is the successor to the ID1700, featuring numerous improvements. Compared to the 1700, the 1750 offers: Higher Dynamic Flow Rate With no Increase in Minimum Fuel Mass. Better Cylinder to Cylinder Balance at Low Pulsewidths. Improved Pressure Sensitivity. All while retaining the same Compatible with everything but dirt corrosion resistance that made the ID1700 famous. Basic Specifications Nominal

Set of 8 injectors

The Best Just Got Better!
The ID1750 is the successor to the ID1700, featuring numerous improvements.

Compared to the 1700, the 1750 offers:

• Higher Dynamic Flow Rate With no Increase in Minimum Fuel Mass.
• Better Cylinder to Cylinder Balance at Low Pulsewidths.
• Improved Pressure Sensitivity.

All while retaining the same “Compatible with everything but dirt” corrosion resistance that made the ID1700 famous.

Basic Specifications

Nominal Flow Rate – 1728cc/min @ 3.0 Bar (43.5 psi), Using E10 Emissions Certification Fuel at 49 Degrees C (120F)
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
Fuel Compatibility – Compatible with Methanol/Ethanol/MTBE/Nitromethane/All Known Hydrocarbon Fuels.
Electrical Connector – USCAR

Application Notes

The ID1750x was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.

The ID1750x will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2000, should not be expected to do so on gasoline.

If you need flawless drivability on gasoline, the ID1300x will provide this, and is capable of approximately 150hp per injector on E85.